Shenzhen Perfect Gallant Tec Co., Ltd.is a national high-tech enterprise specializing in R&D, production and sales of chargers, power adapters, LED drive power and other products. The current product sales cover the domestic and international markets, and the products are exported to Europe and the United States, Japan, the Middle East, Southeast Asia and other places. The company adheres to the service concept of "customer, consumer and employee satisfaction-oriented, continuous innovation, and always exceeding customer expectations". It was rated as a "strategic partner" by customers for the second time, thus establishing a good cooperative reputation in the market. Founded in 2007, the company has been focusing on development for more than ten years. Now the factory covers an area of nearly 5,000 square meters and has a total of nearly 200 employees. And has a group of modern, high-quality, professional and technical personnel and management personnel. The company has all kinds of advanced production equipment. The company has used OA office automation, communication email network management and ERP material management system.
Lean more+
ADVANTAGE
01
The company was established in 2007 and has been developing for more than ten years. Now the factory covers an area of nearly 5,000 square meters.
There is a complete automatic production line, automatic production.
Perfect products with technology, impress the market with products, and impress customers with services.
Your set-and-forget power adapter supplier.
02
In 2008, the company successfully passed the ISO9001 quality system.
In 2009, the company successfully passed the ISO14001 environmental system certification.
The company's products integrate exquisite appearance and perfect functions. The products have passed the safety certification of more than 20 countries, such as: CCC, UL, FCC, CB, CE, GS, PSE, RCM and other product safety certifications of more than 20 countries.
In terms of key technologies such as safety, energy saving and high efficiency, our intelligent IC control makes charging faster and safer, and the energy efficiency reaches the 6-level standard.
03
The company was established in 2007. Now the factory covers an area of nearly 5,000 square meters and has more than 220 employees.
With a monthly production capacity of more than 700,000 units, closely following the development of new adapter technologies in the world, we have launched a variety of high-performance and highly reliable adapter products.
Has a group of modern, high-quality, professional and technical personnel and management personnel. The company has all kinds of advanced production equipment. The company has used OA office automation, communication email network management and ERP material management system to conduct real-time and dynamic management of manufacturing and quality control to ensure quality and efficiency.
04
Samples: Free proofing, 3 days to deliver samples.
Delivery time: On-time delivery rate is 100%, 300K orders can be delivered within 20 days.
OEM/ODM: ID delivery within 3 days, sample delivery within two weeks, and mass production within one month.
After-sales service: one-year replacement, three-year warranty, AIA global insurance.
National high-tech enterprise, accumulated dozens of national invention patents and utility model patents, power products have UL, CE, CB, FCC, GS, CCC, PSE, SAA, KC, BSMI the world's most complete international certification, product certification More than 1000 items.
QUALITY CONTROL
Inspection purpose: to prevent the delay of delivery due to poor production process caused by poor materials on the line
Inspection standard: raw material inspection specification
Inspection equipment: withstand voltage tester, transistor tester, bridge, DC current, leakage current tester, environmental protection tester, swing tester, salt spray tester, flame retardant tester, etc.
Inspection purpose: to ensure that the components attached to the production model are completely in line with the customer's assembly drawing and bill of materials to prevent defects from flowing into the next process
Inspection standard: refer to the data of Bom and gerber, and measure and test each material of the first board
Inspection equipment: TH2817B, TH2830A, magnifying glass
Inspection purpose: to ensure the quality of the product in the process of forming
Inspection standard: refer to BOM, product specification, product testing specification, IPC-A-610E, product reliability verification specification, etc.
Inspection equipment: ATE, electronic load, high voltage tester, ripple tester, leakage current tester, etc.
Inspection purpose: to ensure the quality of semi-finished products in the process of forming
Inspection standard: refer to BOM, product specification, product testing specification, IPC-A-610E, etc.
Inspection equipment: ATE, electronic load, ripple tester, etc.
Inspection purpose: to ensure the service life of the product
Inspection standard: product specification, product testing specification, etc.
Inspection equipment: computer automatic aging system
Inspection purpose: to ensure the quality of each product
Inspection standard: refer to BOM, product specification, product testing specification, product reliability verification specification, etc.
Inspection equipment: ATE, electronic load, high voltage tester, ripple tester, leakage current tester, etc.
Inspection purpose: to ensure the quality of product shipments
Inspection standard: refer to BOM, product specification, product testing specification, product reliability verification specification, finished product appearance inspection specification, etc.
Inspection equipment: ATE, high voltage tester, ripple tester, leakage current tester, etc.
Inspection purpose: to ensure that the product meets the electromagnetic compatibility requirements
Inspection standard: refer to EN55032, EN55024, EN55020, etc.
Inspection equipment: radiation, conduction tester
Inspection purpose: to ensure the safety, longevity, compliance, etc. of product use
Inspection standards: product specifications, product reliability verification specifications, product safety reports, industry requirements, etc.
Inspection equipment: ATE, high voltage tester, ripple tester, leakage current tester, constant temperature and humidity chamber, conduction tester, electrostatic tester, plug-in tester, ball pressure tester, spot temperature tester, etc.
Inspection purpose: to prevent the delay of delivery due to poor production process caused by poor materials on the line
Inspection standard: raw material inspection specification
Inspection equipment: withstand voltage tester, transistor tester, bridge, DC current, leakage current tester, environmental protection tester, swing tester, salt spray tester, flame retardant tester, etc.
Inspection purpose: to ensure that the components attached to the production model are completely in line with the customer's assembly drawing and bill of materials to prevent defects from flowing into the next process
Inspection standard: refer to the data of Bom and gerber, and measure and test each material of the first board
Inspection equipment: TH2817B, TH2830A, magnifying glass
Inspection purpose: to ensure the quality of the product in the process of forming
Inspection standard: refer to BOM, product specification, product testing specification, IPC-A-610E, product reliability verification specification, etc.
Inspection equipment: ATE, electronic load, high voltage tester, ripple tester, leakage current tester, etc.
Inspection purpose: to ensure the quality of semi-finished products in the process of forming
Inspection standard: refer to BOM, product specification, product testing specification, IPC-A-610E, etc.
Inspection equipment: ATE, electronic load, ripple tester, etc.
Inspection purpose: to ensure the service life of the product
Inspection standard: product specification, product testing specification, etc.
Inspection equipment: computer automatic aging system
Inspection purpose: to ensure the quality of each product
Inspection standard: refer to BOM, product specification, product testing specification, product reliability verification specification, etc.
Inspection equipment: ATE, electronic load, high voltage tester, ripple tester, leakage current tester, etc.
Inspection purpose: to ensure the quality of product shipments
Inspection standard: refer to BOM, product specification, product testing specification, product reliability verification specification, finished product appearance inspection specification, etc.
Inspection equipment: ATE, high voltage tester, ripple tester, leakage current tester, etc.
Inspection purpose: to ensure that the product meets the electromagnetic compatibility requirements
Inspection standard: refer to EN55032, EN55024, EN55020, etc.
Inspection equipment: radiation, conduction tester
Inspection purpose: to ensure the safety, longevity, compliance, etc. of product use
Inspection standards: product specifications, product reliability verification specifications, product safety reports, industry requirements, etc.
Inspection equipment: ATE, high voltage tester, ripple tester, leakage current tester, constant temperature and humidity chamber, conduction tester, electrostatic tester, plug-in tester, ball pressure tester, spot temperature tester, etc.
